09/04/2022

NEXT POST
Colored Doors From PVC Profiles How can I make a door made of PVC-profiles of color? For that purpose the colored panels, they paste over white PVC panels. But self-pasting is not recommended. In order to obtain the desired result, you must use in special machines. Improperly glued film sooner or later vspuchitsya, that is, it will bubble. Generally, if interior doors are permanently located at sun, then use color film does not follow. Bright sunlight will sooner or later lead to the appearance of bubbles on the interior doors, you will have thermal expansion of the color films. Instead of color films can be use special interior doors, lined with aluminum (the same method can be used on steel doors). For doors made of PVC-profiles are produced aluminum thresholds. There are two variants of the thresholds for doors made of PVC-profiles. The first option is used for new buildings. In this case, the threshold should be built into the floor, little importance is the depth of placement of the joint stone slabs. PVC profile is inside, it is necessary in order to create thermal insulation, and to prevent condensation. The second option uses for old buildings. This option is a flat nut, its height does not exceed 18 mm. Aluminum - an indispensable material in the design of metal doors. Currently, you can often find the doors on the basis of aluminum. They are more convenient and reliable than the doors on the basis of PVC. Doors made of aluminum Profile is not afraid of any load, continuous operation does not render them virtually no effect (in this case in the event where important are the strength characteristics of metal doors, metal doors are irreplaceable). In the case of doors made of aluminum profile, the following approaches: the use of various panels of laminated...
PREVIOUS POST
Construction A response to the urgent question is simple, as all ingenious. We need only look around. City and suburban space more rapidly and persistently 'grows "from the metal frame buildings and sandwich panels. As the material for the construction of various facilities, they have been used successfully for many years. But do not still know that the same sandwich panels can be applied as facing existing buildings of concrete, brick and stone. Nevertheless, it is true. Consisting of two sheets of metal and insulation, wall and roof sandwich panels help to transform the most ordinary-looking building, make it vivid and memorable. Decorative polymer coating products can be made in any shade - on request. The use of panels of multiple colors allows you to make lining in corporate style, or implement the original projects designers. In addition to decorative functions roof and wall sandwich panels provide additional thermal protection of facades, preventing their destruction as a result of alternate freezing and thawing. Except of buildings, lined with such material, much longer retain heat during emergency off heating in cold seasons. Studies have shown that a brick wall with a surface finish three-layer panels cools up to 6 times longer than with the same finish indoors. Three-layer wall panels are easily installed without the use of special equipment, and the dismantling retain their properties. Thanks to its light weight, cladding does not create additional stress on the foundation of the building. In addition, compact packaged products can be delivered on-site truck that expands its use of sandwich panels. Pop star will undoubtedly add to your understanding. When choosing sandwich panels for facades should pay attention to the manufacturer of this type of product. Because only high quality materials can last for many years, protecting the building from the natural and mechanical...

Recent Comments